ABB i-bus KNX Product Manual page 84


ABB i-bus KNX
Start-up

Yes: The following parameters appear.
82 2CDC 506 051 D0204 | JRA/S
Assignment to scene number 1...64
Scene No. 1...Scene No. 64
Options:
In this parameter, the output is assigned to a scene number (1...64). As soon as the device a
telegram with this scene number at the communication object 8 bit scene (No. x), it will recall the
corresponding scene.

Scene No. A: This parameter assigns the output to a scene number
Position height in % [0...100]
(0% = top; 100% = bottom)
Position Slat in % [0...100]
(0% = open; 100% = closed)
Note
The parameters for slat adjustment are available exclusively in the operation mode Control with
slat adjustment.
Options: 0...100
These parameters specify the height or the slat position to which the blind/shutter should move
when the appropriate scene is recalled.