Parameter Window A: Automatic Sun Protection - ABB i-bus KNX Product Manual


ABB i-bus KNX
Start-up
3.2.5.4.2

Parameter window A: Automatic Sun Protection

In this parameter window, all the settings for the automatic sun protection are undertaken.
Together with other KNX components (in particular with the Shutter Control Unit JSB/S), the blind and
roller shutter actuator can be used to establish easy-to-use automatic sun protection control. Automatic
control can be activated individually for each output.
For more information on the function Automatic Sun Protection, see the application manual
Note
These are direct communication objects:
- Move blinds/shutter up-down
- Slat adjustment/Stop up-down
- Blinds/shutter up-down limited
- Move to position [0...255]
- Move slat [0...255]
- Move to position 1, 2
- Move to position 3, 4
- Scene
If travel detection or a reference movement is triggered during active automatic control, it will be
undertaken.
Deactivation of automatic control
Options:

Via object "Activation": The automatic control is activated = 1 and deactivated = 0 exclusively by a
telegram to the communication object Activation of autom. control. If automatic control is activated, the
incoming telegrams to the direct communication objects are not executed. After deactivation of
automatic control, the blind/shutter remains in its current position and can be controlled again via the
direct communication objects.

Via object "Activation" and move command: Incoming telegrams to direct communication objects also
lead to deactivation of automatic control. The following parameter appears:
Via object "Activation"
Via object "Activation" and move command
Shutter control
JRA/S | 2CDC 506 051 D0204 75