ABB i-bus KNX Product Manual page 40


ABB i-bus KNX
Start-up
Copy
The following options can be selected before copying the parameter settings:

Keep group addresses in the destination channel unchanged (if possible)

Copy group addresses

Delete group addresses in the destination channel
Exchange
The following options can be selected before exchanging the parameter settings:

Exchange without group addresses

Exchange with group addresses

Delete group addresses
38 2CDC 506 051 D0204 | JRA/S
With this button, copy the settings of the source channel into the destination channel or
channels.
With this button, exchange the settings of the source channel with the destination
channel.
Confirm your selection with this button, and the window closes.
Using this button, the window closes without accepting the changes.