ABB i-bus KNX Product Manual page 45


ABB i-bus KNX
Start-up
Enable communication object
"Request status values" 1 bit
Options:

Yes: The 1 bit communication object Request status values is enabled.
Using this communication object, all the status messages can be requested, provided that they have been
parameterized with the option On change or request.
With the option Yes, the following parameters appear:
No
Yes
Request with object value
Options: 0
1
0 or 1

0: Sending status messages is requested with the value 0.

1: Sending status messages is requested with the value 1.

0 or 1: Sending status messages is requested with the values 0 or 1.
JRA/S | 2CDC 506 051 D0204 43