ABB i-bus
KNX
Start-up
3.2.6.1
Parameter window A: Safety/weather
In this parameter window, the settings affecting the function Safety/weather are undertaken.
Parameter settings
Options:
This parameter defines the scope of parameterization.
Standard: In the case of a wind alarm, the blind/shutter moves to a preset position using the
parameter Position on wind alarm. This setting is usually sufficient in smaller projects. In this setting,
the output only reacts to the communication object Wind alarm No.1.
User-defined: Complete parameter access for complex applications or safety settings of the output are
possible. Other parameters appear.
Output reacts on communication object
for wind alarm no.
Options:
This parameter determines the Wind alarm communication objects to which the output reacts. The values
of the assigned communication objects are linked by a logic OR.
Standard
User-defined
Output does not react to wind alarm
1/ 2/ 3/ 1+2/ 1+3/ 2+3/ 1+2+3
JRA/S | 2CDC 506 051 D0204 89