ABB i-bus KNX Product Manual page 20


ABB i-bus KNX
Device technology
Operating and display elements
Degree of protection
Safety class
Isolation category
KNX safety extra low voltage
Temperature range
Ambient conditions
Design
Weight without packaging
Mounting
Mounting position
Housing/color
Approvals
CE mark
18 2CDC 506 051 D0204 | JRA/S
Button/LED
Button and LED
Buttons and LEDs
Two buttons and LEDs per output
IP 20
II, in the installed state
Overvoltage category
Pollution degree
SELV 24 V DC
Operation
Storage
Transport
Maximum air humidity
Modular installation device (MDRC)
Dimensions (H x W x D) in mm; JRA/S type
- Height
- Width
- Depth
Mounting width in units (18 mm modules)
Mounting depth
JRA/S Type
Weight in kg
On 35 mm mounting rail
Any
Plastic housing, gray
KNX to EN 50 090-1, -2
In accordance with the EMC guideline and low
voltage guideline
For assignment of the physical address
For toggling between manual operation /
®
operation via ABB i-bus and displays
For control (travel UP/DOWN, slat
OPEN/CLOSED) of the output and display of the
status
Compliant to EN 60 529
Compliant to EN 61 140
III to EN 60 664-1
2 to EN 60 664-1
-20 °C...+45 °C
-25 °C...+55 °C
-25...+70 °C
93 %, no condensation allowed
Modular installation device, Pro M
2.230.2.1 4.230.2.1
90 90
72 72
64.5 64.5
4 4
64.5 64.5
2.230.2.1 4,230. 2.1
0.2 0.25
To EN 60 715
Halogen-free
Certification
8.230.2.1
90
144
64.5
8
64.5
8.230.2.1
0.45