ABB i-bus KNX Product Manual page 55


ABB i-bus KNX
Start-up
Position on wind alarm
Position on rain alarm
Position on frost alarm
Options:
These parameters define the position of the blind/shutter when a weather alarm (wind, rain, frost) is
received. The blind/shutter can no longer be operated via other communication objects or by manual
operation until the weather alarm has been rescinded. Traveling range limits are not taken into account
with weather alarms.

Activated - no reaction: If the blind/shutter is performing a movement, this movement action to the
target position is carried out. If the blind/shutter is at rest, it will remain unchanged in its position.

Activated - up: The blind/shutter moves UP after a weather alarm is received.

Activated - down: The blind/shutter moves DOWN after a weather alarm is received.

Activated - stop: If the blind/shutter is performing a movement, this movement stops immediately. If
the blind/shutter is at rest, it will remain unchanged in its position.

Activated - Position 1...4: If one of these positions are selected, the blind/shutter moves to a preset
position. The blind/shutter height and slat setting of the corresponding position can be set in
parameter window A: Positions/Presets, p. 72).

Activated - individual position: A freely-definable position can be moved to. The following parameters
appear:

Deactivated: In the case of a weather alarm, there is no reaction.
Activated - no reaction
Activated – up
Activated – down
Activated – stop
Activated - Position 1...4
Activated - individual position
Deactivated
Position Height in % [0...100]
(0% = top; 100% = bottom)
Position Slat in % [0...100]
(0% = open; 100% = closed)
Note
The parameters for slat adjustment are available exclusively in the operation mode Control with
slat adjustment.
Options: 0...100
These parameters specify the height or the slat position of the blind/shutter.
JRA/S | 2CDC 506 051 D0204 53