ABB i-bus KNX Product Manual page 21


ABB i-bus KNX
Device technology
Device type Application program
JRA/S 2.230.2.1 Blind / roller shutter 2f 230 V M/...*
JRA/S 4.230.2.1 Blind / roller shutter 4f 230 V M/...*
JRA/S 8.230.2.1 Blind / roller shutter 8f 230 V M/...
* ... = Current version number of the application. Please refer the software information on our homepage for this purpose.
Note
ETS and the current version of the device application program are required for programming.
The current application program is available for download at www.abb.com/knx. After import in the ETS,
it is available in the ETS under ABB/Blind/Switch.
The device does not support the locking function of a KNX device in ETS. If you disable access to all of
the project devices by using a BCU code, it has no effect on this device. Data can still be read and
programmed.
Important
Electronic drives with soft start or soft stop are not suitable for control via JRA/S.
Maximum number of Maximum number of
communication objects group addresses
69 255
129 255
249 255
Maximum number of
associations
255
255
255
JRA/S | 2CDC 506 051 D0204 19