ABB i-bus KNX Product Manual page 69


ABB i-bus KNX
Start-up
Upper limit valid for
automatic commands
Options: Yes
No

Yes: The input upper limit of the blind/shutter is taken into account and also executed in
the case of automatic telegrams.

No: The upper limit of the blind/shutter is not taken into account in the case of automatic
telegrams. The blind/shutter moves to the calculated position.
Upper limit valid for
direct commands
Options: Yes
No

Yes: The input upper limit of the blind/shutter is taken into account and also executed in
the case of direct telegrams.

No: The upper limit of the blind/shutter is not taken into account in the case of direct
telegrams.
Lower limit in % [0...100]
(0% = top; 100% = bottom)
0...100
Options:
The lower limit of the travel range is specified here.
Lower limit valid for
automatic commands
Options: Yes
No

Yes: The input lower limit of the blind/shutter is taken into account and also executed in
the case of automatic telegrams.

No: The lower limit of the blind/shutter is not taken into account in the case of automatic
telegrams. The blind/shutter moves to the calculated position.
Lower limit valid for
direct commands
Options: Yes
No

Yes: The input lower limit of the blind/shutter is taken into account and also executed in
the case of direct telegrams.

No: The lower limit of the blind/shutter is not taken into account in the case of direct
telegrams.
JRA/S | 2CDC 506 051 D0204 67