Table of Contents
Advertisement
S
P
ERVICE
ROCEDURES
T
O REPLACE THE MOTHERBOARD BATTERY
1. Shut down the imagePRESS Server, remove all cables from the back, and open the system
(see
page
59).
In order to access the battery, you must remove the left panel.
2. Locate the battery on the motherboard (see
3. Carefully push the clip away from the battery until the socket ejects the battery.
Motherboard battery
F
31:
IGURE
4. Slide the battery out of its socket.
5. To insert a new battery, slide it into the socket so that the positive (+) side of the battery
faces up.
6. Press the battery down into the socket until it snaps into place.
Make sure that the battery is securely installed in the socket.
7. Reassemble the imagePRESS Server and verify its functionality (see
8. Configure the time and date in Setup.
Figure 26 on page
Clip
Battery
Socket
76).
page
130).
97
Advertisement
Table of Contents
