Canon imagePRESS A3200 Installation And Service Manual page 47

U PRESS S
SING THE IMAGE
USB Media Server— Allows customers to print a file from a USB device to the
imagePRESS Server.
Allows customers to scan a document placed on the scanner glass or in the
Scan Job—
document feeder of the copier. For more information, see Utilities on the User
Documentation CD.
Suspend Printing— Suspends the connection from the imagePRESS Server to the copier. This
option interrupts the current print job so that you can use the copier to make copies; after you
finish making copies, you can select Resume Printing and the copier continues processing and
printing jobs.
Resume Printing— Reestablishes the connection from the copier to the imagePRESS Server so
that you can resume printing after interrupting the print job to make copies (used with
).
Suspend Printing
When you select this command, you can choose from the following:
Shut Down—
– Restart Server (soft reset) — resets the imagePRESS Server server software, but does not
reboot the entire system. Network access to the imagePRESS Server is temporarily
interrupted and all currently processing jobs are aborted and might be lost.
– Shut Down System— Shuts down all imagePRESS Server properly and then powers off
the system.
– Reboot System (hard reset) — Shuts down all imagePRESS Server activity properly and
then reboots.
N : These commands are equivalent to the Restart Server, Shut Down System, and Reboot
OTE
System commands on the imagePRESS Server Control Panel (see
always use these commands to restart, shut down, or reboot the system; do not use the power
and reset buttons on the imagePRESS Server front panel.
Clear Server —Clears all jobs from the server queues. It also clears the Job Log, all jobs
saved on the server HDD, and the index of all archived jobs. The Clear Server command
enables you to clear all queued print jobs from the imagePRESS Server (jobs in the
imagePRESS Server Print, Hold, and Printed queues). Jobs can also be deleted, individually
or as a group, from the job management tools. Clear Server also clears the Job Log, all jobs
archived on the imagePRESS Server HDD, the index of archived jobs, and, finally, all
FreeForm masters and the index of FreeForm masters. If you keep Job Logs, print or export
the Job Log before you choose Clear Server.
If you select the Clear Server command, you are asked to confirm your selection. If the
Administrator password has been set, you are prompted to enter it.
—Allows you to access the Setup options in order to configure the network and
Run Setup
printing environment. Typically, it is the network administrator's responsibility to configure
Setup according to the network and user environment. Setup may be required the first time
the imagePRESS Server is powered on and can be changed at any time. For information about
each Setup option, see Configuration and Setup on the User Documentation CD.
ERVER
47
page 45). You should