Figure 20: Removing/Replacing The Front Panel - Canon imagePRESS A3200 Installation And Service Manual

S P
ERVICE ROCEDURES
2. Pull outward to release the six tabs that secure the front panel to the chassis, and lift the
panel off the chassis (see
First release the two top tabs, then the two middle tabs, and then the two bottom tabs. Use a
screwdriver to release the tabs that are hard to reach.
Make sure that the cutouts in the panel clear the power and reset buttons and the front USB
ports.
Removing/replacing the front panel
F 20:
IGURE
3. To replace the front panel, align the four cutouts in the panel with the power and reset
buttons and front USB ports (see
4. Press the panel against the chassis to lock the panel into place.
Lock the panel tabs in pairs (first the top tabs, then the middle tabs, then the bottom tabs).
5. Replace the upper faceplate.
Orient the faceplate as shown in
the chassis (see Figure 19 on page
making sure that all four tabs of the faceplate are securely locked in place.
Figure 20).
Figure 20 on page
Figure 20 on page 64. Insert the top tabs of the faceplate into
63). Then carefully press the faceplate against the chassis,
Cutout (1 of 4)
Upper faceplate
Tab (1 of 6)
64).
64