Table of Contents
Advertisement
S
P
ERVICE
ROCEDURES
T
CPU
O REMOVE A
COOLING ASSEMBLY
To avoid flexing and possibly damaging the motherboard, always service the CPU cooling
assemblies one at a time. If you must service both CPU cooling assemblies, observe the
following guidelines: remove, service, and replace the first cooling assembly; then remove,
service, and replace the second cooling assembly.
An exception is allowed if you are removing the CPU cooling assemblies to service the
motherboard. In this case, first remove the motherboard tray (see
motherboard mounting screws to relieve tension on the motherboard, and then remove both
cooling assemblies from the motherboard as described in the following steps.
1. Shut down the imagePRESS Server, remove all cables from the back, and then open the
system (see
page
In order to access the CPU cooling assembly, you must remove the left panel.
2. Remove the CPU fan cable from its connector on the motherboard (see
page
58).
59).
103
page
79), remove the 9
Figure 17 on
Advertisement
Table of Contents
