T
ROUBLESHOOTING
Clearing the CMOS
Use the following procedure to clear the CMOS for the imagePRESS Server, when suggested
as a troubleshooting action.
T
CMOS
O CLEAR THE
1. Make sure the imagePRESS Server is powered off, and remove the power cable from the
system.
2. Access and open the imagePRESS Server (see
3. Remove the battery from the motherboard (see
Set aside the battery so that you can replace it later.
4. Wait two full minutes.
5. Reinstall the battery (see
6. Reassemble the imagePRESS Server (see
7. Reconnect the power cable to the imagePRESS Server.
8. Power on the imagePRESS Server, and configure the date and time in Setup.
For more information, see Configuration and Setup on the User Documentation CD.
page
59).
page
page
96).
page
130).
96).
171