Table of Contents
Advertisement
S
S
YSTEM
OFTWARE
12. If you were able to save the imagePRESS Server settings earlier, restore the settings to the
system:
• Open a Web browser window on a client computer that is on the same network as the
imagePRESS Server. Type the IP address of the imagePRESS Server in the URL field, and
press Enter.
• On the WebTools home page, click the Configure tab, and then click the Launch
Configure button. Type Fiery.1 for the password, and click OK
• Expand the Server item in the left pane, and click Backup/Restore.
• Click Restore Fiery Settings. At the reboot warning, click OK. Then locate and select the
configuration file that you saved earlier, and click Open.
• Allow the imagePRESS Server to reboot.
If you were unable to save the imagePRESS Server settings, you must configure Setup
N
:
OTE
using the Configuration pages you printed earlier. For information on performing setup, see
Configuration and Setup on the User Documentation CD. Bypass any settings if it is more
appropriate for the network administrator to set them. After configuring the desired settings,
exit Setup and allow the system to reboot.
13. Reinstall the Canon technician-related software.
The technician-related software is deleted when you install system software and must be
reinstalled. The imagePRESS Server must have the Advanced Controller Interface Kit
installed in order to install the technician-related software.
For installation instructions, see the documentation provided on the technician-related
software CD.
14. Have the system administrator reinstall any fonts or custom color profiles.
Remind the system administrator that all preexisting fonts and custom color profiles were
deleted when you installed system software.
137
Advertisement
Table of Contents
