Table of Contents
Advertisement
S
P
ERVICE
ROCEDURES
T
HDD
O REMOVE A
1. If you have not done so already, allow the network administrator the opportunity to print the
Job Log and save any custom simulation and output profiles. Also, print the following, if
possible:
• Configuration page—lists any installed options and records the customer's current Setup
configuration (for more information, see
• Font List—lists the fonts currently on the HDDs. Along with the fonts provided, the
customer may have installed additional fonts (for more information, see
2. Shut down the imagePRESS Server, remove all cables from the back, and then open the
system
(see
page
59).
In order to access the HDDs, you must remove the left panel.
3. Remove the power cables from all three HDDs.
4. Remove the data cables from all three HDDs.
5. Press the latches on the sides of the HDD and slide the HDD assembly out from the chassis
(see
Figure
43).
Latch
Removing/replacing the HDD
F
43:
IGURE
page
49).
Latch
120
page
49).
Advertisement
Table of Contents
