Installation - HIKVISION DS-2CD883F-E Installation Manual

Installation Manual of Network Camera

4.4.2 Installation

Steps:
1. Drill the cable hole and the screw hole in the ceiling according to the supplied drill template.
2. Hammer the supplied plastic expansion bolt into the screw holes.
3. Route the cables to the cable hole and connect the corresponding power cable and video cable
4. Fix the camera to the wall with the supplied screws
5. Adjust the surveillance angle.
1). Loosen No.1 adjusting screw to adjust the panning position [0° ~ 360° ].
2). Tighten No.1 adjusting screw.
3). Loosen the No.2 adjusting screw to adjust the tilting position [0° ~ 100° ].
Lo-Call 1890 866 900
2
Ceiling Mounting
1
2
1:Screw Hole for
Bracket
1
2
Figure 4-20 The Drill Template
Adjusting
Screw
Figure 4-21 Fix the Camera to the Ceiling
www.cctvireland.ie
1
2
2:Screw Hole for
Mounting Base
1
92
shop@cctvireland.ie