HIKVISION DS-2CD883F-E Installation Manual page 11

Installation Manual of Network Camera
No.
12
13
14
15
Press RESET about 10s when the camera is powering on or rebooting to restore the default settings,
including the user name, password, IP address, port No., etc.
The type of auto-iris interface is shown as below figure:
Power, Video and GND pins are used when the auto-iris is driven by video; And Damp+, Damp-,
Drive+ and Drive- pins are used when the auto-iris is driven by DC.
Lo-Call 1890 866 900
Description
IN, G: Alarm Input Interface
1A, 1B: Alarm Output Interface
Grounding
RESET: Reset Button
Figure 2-2 Auto-iris Interface
Table 2-2 Pins
No. DC-driven
1 Damp-
2 Damp+
3 Drive+
4 Drive-
www.cctvireland.ie
10
shop@cctvireland.ie