Product Features; Installation - HIKVISION DS-2CE18D0T-LFS User Manual

The sensor may be burned out by a laser beam, so

when any laser equipment is in using, make sure that
the surface of sensor will not be exposed to the laser
beam.
Do not expose the device to high electromagnetic

radiation or extremely hot, cold, dusty or damp
environment.
To avoid heat accumulation, good ventilation is

required for the operating environment.
Keep the camera away from liquid while in use for non-

water-proof device.
While in delivery, the camera shall be packed in its

original packing, or packing of the same texture.
The beam of the light at the distance of 200 mm is

classified as Risk Group 1 (RG1). Possible hazardous
optical radiation emitted from this product.
DO NOT stare at operating light source. May be harmful

to the eyes.
Wear appropriate eye protection or turn on the

supplement light only at a safe distance (0.6 m) or in
the area that is not directly exposed to the light when
installing or maintaining the device.
1 Introduction

1.1 Product Features

The main features are as follows:
High performance CMOS sensor

OSD menu with configurable parameters

Smart light

3-axis adjustment

Hybrid supplement light with IR and white light

1.2 Overview
Lens
Microphone
Note:
Press and hold the switch button for 5 seconds to switch
the video output. Four kinds of video outputs are
available: TVI, AHD, CVI, and CVBS.

2 Installation

Before you start
Make sure that the device in the package is in good

condition and all the assembly parts are included.
Make sure that all the related equipment is power-off

during the installation.
Check the specification of the products for the

installation environment.
Check whether the power supply is matched with your

power output to avoid damage.
Make sure the wall is strong enough to withstand three

times the weight of the camera and the mount.
Figure 1-1 Overview of Camera
Bracket
body
Switch Button
Power Cord
Video Cable