Installation - HIKVISION DS-2CD883F-E Installation Manual

Installation Manual of Network Camera
Name
LAN（PoE）
AUDIO OUT/IN
CVBS，GND
1A，1B
D+，D-
IN，GND
DC12V
Press RESET about 10s when the camera is powering on or rebooting to restore the default settings,
including the user name, password, IP address, port No., etc.

3.7.2 Installation

Steps:
1. Drill the screw holes and the cable hole according to the supplied drill template.
(Optional)Routing the cable from the side outlet instead of the cable hole drilled on the ceiling is
supported. Use a plier to remove the part shown in the figure below, and you can route the cables
from the side outlet.
Lo-Call 1890 866 900
Description
10M/100M Self-adaptive Ethernet Port(PoE
Supported)
Audio Out/In
Auxiliary video output
Alarm Out
RS-485 Interface
ALARM IN
Power Supply Interface（12 VDC ）
2
Hole
1
BOTTOM
1
2
Figure 3-81 Drill Template
www.cctvireland.ie
1
1
shop@cctvireland.ie
61