HIKVISION DS-2CD883F-E Installation Manual page 68

Installation Manual of Network Camera
3. Connect the corresponding power cable, network cable, audio and alarm cables.
4. Install the dome drive to the mounting base.
5. Adjust the surveillance angle.
1). Loosen the lock screw besides the lens.
2). Hold the plastic plate and rotate the camera to adjust the panning angle [0~350° ].
3). Push the lens forward and backward to adjust the tilting angle [0~80° ].
4). Rotate the lens to adjust the azimuth angle of the camera [0~350° ].
5). Tighten the lock screw.
6. Adjust the Lens.
Lo-Call 1890 866 900
Dome
Drive
Figure 3-94 Install the Dome Drive
Tilt 0~80°
Rotation 0~350°
Figure 3-95 3-axis Adjustment
www.cctvireland.ie
Pan 0~350°
shop@cctvireland.ie
67