HIKVISION DS-2CD883F-E Installation Manual page 115

Installation Manual of Network Camera
Three side outlets on the enclosure are selectable, which makes routing the cables easier instead of
drilling a cable hole on the ceiling. Use a plier to remove the plastic and route the cables through the
hole.
3. Connect the corresponding power/network cable.
4. Fix the camera to the ceiling with the supplied expansion screws.
5. Adjust the Lens.
1). Loosen the lock screw.
2). Rotate the enclosure to adjust the pan angle; rotate the camera to adjust the tilt angle.
3). Tighten the lock screw to fix the optimum surveillance angle.
Lo-Call 1890 866 900
Figure 5-5 Secure the Camera to the Ceiling
Figure 5-6 Lock Screw
www.cctvireland.ie
114
Lock Screw
shop@cctvireland.ie