HIKVISION DS-2CD883F-E Installation Manual page 30

29
Installation Manual of Network Camera
Figure 3-21 Adjust Panning Position
Figure 3-22 Adjust Tilting Position
As the lens of camera has already been factory adjusted to the best imaging effect, you just need to
adjust the panning position and tilting position to get the desired surveillance angle.
7. Reinstall the cover before viewing the image so that you can get the same surveillance effect as
the installation is done.
8. Install the cover, and tighten the set screws.
Lo-Call 1890 866 900 www.cctvireland.ie shop@cctvireland.ie