Installation - HIKVISION DS-2CD883F-E Installation Manual

Installation Manual of Network Camera
The type of auto-iris interface is shown as below figure:
Power, Video and GND pins are used when the auto-iris is driven by video; Damp+, Damp-, Drive+
and Drive- pins are used when the auto-iris is driven by DC.

2.2.2 Installation

 Ceiling Mounting
Steps:
1. Install the ceiling mount to the ceiling with the supplied expansion screws.
Lo-Call 1890 866 900
Figure 2-9 Auto-iris Interface
Table 2-4 Pins
No. DC-driven
1 Damp-
2 Damp+
3 Drive+
4 Drive-
www.cctvireland.ie
14
shop@cctvireland.ie