Installation - HIKVISION DS-2CD883F-E Installation Manual

Installation Manual of Network Camera
 Press RESET about 10s when the camera is powering on or rebooting to restore the default
settings, including the user name, password, IP address, port No., etc.

3.4.2 Installation

 Ceiling Mounting
Steps:
1. Drill the screw holes on the ceiling with the supplied drilling template. If you need to route the
cables from the bottom of the camera, cut a cable hole in the ceiling.
2. Secure the back box to the ceiling with screws.
3. Loosen the set screws with the hex key (supplied) to remove the bubble; remove the black liner.
Lo-Call 1890 866 900
Drill Template
4
2 1 2
3
Hole A: for cables routed
Screw hole 3: for
through the ceiling
Mounting Base
3
2
1 2
4
Figure 3-34 Drilling Template
Figure 3-35 Mount Back Box
www.cctvireland.ie
4
3
3
4
Code:190600839
shop@cctvireland.ie
37