HIKVISION DS-2CD883F-E Installation Manual page 44

Installation Manual of Network Camera
 Wall mounting:
Steps:
1. Drill the screw holes and the cable hole on the wall according to the supplied drill template.
2. Secure the back box to the wall with the supplied screws.
Position the side cable outlet directly below to prevent moisture from getting inside the camera.
3. Loosen the set screws with the hex key (supplied) to remove the bubble; remove the black liner.
Lo-Call 1890 866 900
Drill Template
4
2 2
1
3
Hole A: for cables routed
Screw hole 3: for
through the ceiling
Mounting Base
3
2
1 2
4
Figure 3-47 Drilling Template
Figure 3-48 Secure Back box
www.cctvireland.ie
4
3
3
4
Code:190600839
shop@cctvireland.ie
43