HIKVISION DS-2CD883F-E Installation Manual page 49

Installation Manual of Network Camera
If required, you can route cables through the side opening on the side of the mounting base.
4. Loosen the tilt lock screws, adjust the tilting position in a range of 65 degrees, and tighten the tilt
lock screws.
5. Rotate the black liner to adjust the panning position in a range of 180 degrees until you get the
desired surveillance angle.
Lo-Call 1890 866 900
Figure 3-56 Fix the Mounting Base
Figure 3-57 Side Opening
Pan
Figure 3-58 Surveillance Angle Adjustment
www.cctvireland.ie
Side Opening
Tilt
Tilt Lock Screw
Black Liner
shop@cctvireland.ie
48