Ceiling Mounting With Gang Box - HIKVISION DS-2CD883F-E Installation Manual

Installation Manual of Network Camera
 Ceiling Mounting With Gang Box
Steps:
1. Disassemble the camera.
2. Install the gang box in the ceiling.
3. Attach the mounting base to the gang box with two screws.
4. Route the cables through the hole in the center of the mounting base.
5. Align the camera with the mounting base.
6. Tighten the screws to secure the camera with the mounting base.
7. Connect the video output connector to the monitor. Connect the power connector to the power
supply.
8. Adjust the image and focus. Please refer to the Image and Focus Adjusting for more detailed
information.
Lo-Call 1890 866 900
Mounting Base
Figure 3-69 In-ceiling Mount
Figure 3-70 Secure Camera
www.cctvireland.ie
55
shop@cctvireland.ie