HIKVISION DS-2CD883F-E Installation Manual page 40

Installation Manual of Network Camera
Outlet
5. After connecting the network cable and power cable, view the image of the camera over the
network. Loosen the lock screws; adjust the panning position and tilting position and rotate the lens
to get the desired surveillance angle; fasten the lock screws.
Pan
6. Reinstall the black liner and bubble to finish the installation.
Lo-Call 1890 866 900
Figure 3-38 Side Cable Routing
Lock Screw
Figure 3-39 Angle Adjusting
Figure 3-40 Reinstall
www.cctvireland.ie
Tilt
Rotate
shop@cctvireland.ie
39