HIKVISION DS-2CD883F-E Installation Manual page 16

Installation Manual of Network Camera
2. Fit the lens (not supplied) to the camera and rotate it to get it tightened.
●
Install the adapter ring to the lens interface if a C-mount lens is used.
●
A manual-iris lens can be directly installed to the camera without plugging the power cable of
the auto-iris to the auto-iris interface.
3. Plug the auto-iris cable to the auto-iris interface.
4. Align the screw hole on the camera with the ceiling mount and rotate the camera to get it fixed.
5. Adjust the surveillance angle.
1). Loosen the pan nut to adjust the pan angle [0° -360° ].
Lo-Call 1890 866 900
Figure 2-10 Install the Mount
Figure 2-11 Install the Lens
www.cctvireland.ie
Adjustable Nut
shop@cctvireland.ie
15