Installation; Connecting The Cables - HIKVISION AP530HT Quick Start Manual

1 Installation

Before you start:
Check the package contents and make sure that the device in the package is in good condition and
all the assembly parts are included.
There are several ways to install the analog speed dome. The wall mounting is taken as an example
below.

1.1 Connecting the Cables

Please turn the power off before connect the cables.
The cable interfaces of speed dome are shown in following figure. The cables are distinguished by
different colors. The labels attached on the cables are for identification.
Yellow&Green
Yellow
Orange
Video Output
HD-TVI Speed Dome·Quick Start Guide
Black
Red
②
Figure 1-1 Cables of 7-inch IR Speed Dome
Table 1-1 Cables Description
Name
AC24V
RS485+/-
VIDEO
①
①
RED
YELLOW/GREEN GND
BLACK
②
YELLOW
ORANGE
Description
Power supply
485 control
Coaxial and analog video output
1
AC24V
AC24V
R485-
R485+