HIKVISION DS-2CD883F-E Installation Manual page 58

Installation Manual of Network Camera
5. Route the cables through the hole in the center of the wall mount.
6. Align the camera with the mounting base.
7. Tighten the set screws to secure the camera with the mounting base.
8. Connect the video output connector to the monitor. Connect the power connector to the power
supply.
9. Adjust the image and focus. Please refer to Image and Focus Adjusting for more detailed
information.
10. Install the inner black liner back to the camera.
11. Align the bubble with the camera.
12. Tighten the screws to secure the bubble with the camera.
Lo-Call 1890 866 900
Figure 3-73 Secure Camera
Figure 3-74 Secure Black Liner and Bubble
www.cctvireland.ie
57
shop@cctvireland.ie