HIKVISION DS-2CD883F-E Installation Manual page 19

Installation Manual of Network Camera
1). Loosen the pan nut to adjust the pan angle [0 ° -360° ].
2). Loosen the knob on the ceiling mount to adjust the tilt angle [0° -± 45° ].
8. Adjust the Lens
1). Connect the VIDEO OUT interface of the camera to the debugging monitor.
2). Adjust the focus lever to obtain a perfect image on the monitor.
 Installing the SD Card
● Insert the SD card to the SD card slot to get it installed.
● Push the inserted SD card slightly to get it sprung by its built-in springing to remove it.
Lo-Call 1890 866 900
Figure 2-17 Adjust the Surveillance Angle
Figure 2-18 Install the SD Card
www.cctvireland.ie
Tilt Adjust Nut
Pan Adjust Nut
shop@cctvireland.ie
18
SD Card