HIKVISION DS-2CD883F-E Installation Manual page 104

Installation Manual of Network Camera
 Please loosen the screws slightly until you can adjust the camera and do not remove the
screws from the bracket.
 After the monitoring angle is adjusted, you may need to install a water-proof rubber case
(purchased separately) to the foldable position of the bracket to protect it from water.
8. Loosen the lock screw on the sun shield and remove the sun shield.
9. Rotate to remove the front box from camera and adjust the zoom lever and focus lever to get
a clear image.
Romove the Front Box
10. Reinstall the front box and the sun shield to finish the installation.
Lo-Call 1890 866 900
Figure 4-38 Adjust Monitoring Angle
Zoom Lever
Focus Lever
Figure 4-39 Lens Adjustment
www.cctvireland.ie
Pan Adjust Nut
Tilt Adjust Nut
Remove the Sun Shield
103
shop@cctvireland.ie