Safety Instruction - HIKVISION DS-2CD883F-E Installation Manual

Installation Manual of Network Camera

Safety Instruction

These instructions are intended to ensure that the user can use the product correctly to avoid danger
or property loss.
The precaution measure is divided into 'Warnings' and 'Cautions':
Warnings: Serious injury or death may be caused if any of these warnings are neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
Warnings Follow these safeguards to
prevent serious injury or death.
Warnings:
 Please adopt the power adapter which can meet the safety extra low voltage (SELV) standard.
And source with 12 VDC or 24 VAC (depending on models) according to the IEC60950-1 and
Limited Power Source standard.
 If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
 To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture.
 This installation should be made by a qualified service person and should conform to all the local
codes.
 Please install blackouts equipment into the power supply circuit for convenient supply
interruption.
 Please make sure that the ceiling can support more than 50(N) Newton gravities if the camera is
fixed to the ceiling.
 If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
Lo-Call 1890 866 900
Cautions Follow these precautions to
prevent potential injury or material
damage.
www.cctvireland.ie
3
shop@cctvireland.ie