HIKVISION DS-2CD883F-E Installation Manual page 26

Installation Manual of Network Camera
6. Remove the bubble and connect the RCA analog video output with a monitor to view the image of
the camera. Loosen the lens set screw and pan, tilt or rotate the lens to get a desired surveillance
angle. Adjust the lens focus to obtain a perfect image. Fasten the lens set screw. Reinstall the
bubble.
7. Install the trim plate with screws to finish the installation.
Lo-Call 1890 866 900
Figure 3-14 Image Adjusting
Figure 3-15 Trim Plate Installing
www.cctvireland.ie
25
shop@cctvireland.ie