Spantree-7; Spantree_Fast - Cisco Catalyst 4500 Series Message Manual

SPANTREE Messages

SPANTREE-7

Error Message SPANTREE-7-BLOCK_PORT_TYPE: Blocking [char] on [char]. Inconsistent
port type.
Error Message SPANTREE-7-RECV_1Q_NON_TRUNK: Received 802.1Q BPDU on non trunk [char]
[char].
Error Message SPANTREE-7-PORTDEL_SUCCESS: [char] deleted from Vlan [dec]

SPANTREE_FAST

Error Message SPANTREE_FAST-7-PORT_FWD_UPLINK: [char] [char] moved to Forwarding
(UplinkFast).
Catalyst 4500 Series Switch Cisco IOS System Message Guide Release 12.2(31)SGA
2-96
The listed interface is being held in spanning tree blocking state until the port type
Explanation
inconsistency is resolved. The port ID is [char].
Verify that the configuration and operational state of the listed interface and
Recommended Action
that of the interface to which it is connected are in the same mode (access or trunk). If the mode is
trunk, verify that both interfaces have the same encapsulation type (ISL or 802.1Q). When these
parameters are consistent, spanning tree automatically unblocks the interface.
An SSTP BPDU was received on the listed interface, which is not an operational
Explanation
trunking interface. The interface ID is [char].
Verify that the configuration and operational state of the listed interface and
Recommended Action
that of the interface to which it is connected are in the same mode (access or trunk). If the mode is
trunk, verify that both interfaces have the same encapsulation type (none, ISL, or 802.1Q). Once
these parameters are consistent, spanning tree automatically unblocks the interface.
The interface was deleted from the specified VLAN.
Explanation
This is an informational message only. No action is required.
Recommended Action
The listed interface was selected as the new root port for the listed spanning tree
Explanation
instance.
This is an informational message only. No action is required.
Recommended Action
Chapter 2 Messages and Recovery Procedures
OL-11541-01