Cisco Catalyst 4500 Series Message Manual page 76

IOSMODPORTMAN Messages
Error Message C4K_IOSMODPORTMAN-6-PACKETMEMORYERRORSOFTRESET:Supervisor soft reset
due to packet memory errors
Explanation
memory. It was soft reset either because it does not have self power cycle capability or the switch is
operating in SSO mode.
Recommended Action
Error Message C4K_IOSMODPORTMAN-6-PEMGOOD: Power Entry Module has been restored to
working condition
Explanation
Recommended Action
Error Message C4K_IOSMODPORTMAN-6-POWERSUPPLYFANGOOD:Fan of power supply [dec] is
okay
Explanation
Recommended Action
Error Message C4K_IOSMODPORTMAN-6-POWERSUPPLYGOOD:Power supply [dec] is okay
Explanation
Recommended Action
Error Message C4K_IOSMODPORTMAN-6-POWERSUPPLYINSERTED:Power supply [dec] has been
inserted
Explanation
Recommended Action
Error Message C4K_IOSMODPORTMAN-6-POWERSUPPLYINSERTEDDETAILED: Power supply [dec]
([char] S/N: [char] Hw: [dec].[dec]) has been inserted
Explanation
Recommended Action
Error Message C4K_IOSMODPORTMAN-6-TEMPOK: Chassis temperature is now ok -
CurrentTemp: [dec]C, Threshold: [dec]C
Explanation
Recommended Action
Catalyst 4500 Series Switch Cisco IOS System Message Guide Release 12.2(31)SGA
2-56
This supervisor engine was reset because it encountered SRAM errors in the packet
Contact your technical support representative.
The external power supply source providing PoE is working correctly.
This is an informational message only. No action is required.
A failed power supply was fixed.
This is an informational message only. No action is required.
A failed power supply was fixed.
This is an informational message only. No action is required.
The specified power supply was inserted.
This is an informational message only. No action is required.
A power supply was inserted.
This is an informational message only. No action is required.
The chassis temperature is now normal.
This is an informational message only. No action is required.
Chapter 2 Messages and Recovery Procedures
OL-11541-01