Sysman-3; Sysman-4; Transceiver Messages - Cisco Catalyst 4500 Series Message Manual

Cisco ios system message guide
Hide thumbs Also See for Catalyst 4500 Series:
Table of Contents

Advertisement

Chapter 2
Messages and Recovery Procedures

SYSMAN-3

Error Message C4K_SYSMAN-3-LINECARDDIAGSFAILED:Module in slot [dec] failed online
diagnostics. Please use 'show diagnostics result module [dec]test <tid> detail'
command for details.
Error Message C4K_SYSMAN-3-LINECARDDIAGSPARTIALFAILURE:Partial failure on module
[dec]. Please use 'show diagnostics result module [dec]test <tid> detail' command
for details.

SYSMAN-4

Error Message C4K_SYSMAN-4-MORETHANONEDEBUGCOMMANDEXECUTING:Cannot execute '[char]'
right now, please try again later

TRANSCEIVER Messages

This section contains the TRANSCEIVER subsystem messages.
Error Message TRANSCEIVER-3-INTERNAL_ERROR: [char]
OL-11541-01
A module failed online diagnostics. When this occurs, all the module's ports are flagged
Explanation
as faulty and cannot be used until the problem is resolved.
Recommended Action
Remove and reinsert the module. If the problem persists, copy the message
exactly as it appears on the console or in the system log, contact your technical support
representative, and provide the representative with the gathered information.
Explanation
Some of the module's ports have failed online diagnostics.
Remove and reinsert the switch. If the problem persists, copy the message
Recommended Action
exactly as it appears on the console or in the system log, contact your technical support
representative, and provide the representative with the gathered information.
Explanation
More than one Telnet session issued a debugging command at the same time. Only one
Telnet session can issue a debugging command at the same time. All Telnet sessions receive this
message, except the Telnet session that issued the command first.
Recommended Action
Try the command when other Telnet sessions are not issuing debugging
commands.
The TRANSCEIVER subsystem encountered an internal software error. The error
Explanation
message contains text that can be used to help identify the cause of the problem.
Contact your technical support representative.
Recommended Action
Catalyst 4500 Series Switch Cisco IOS System Message Guide Release 12.2(31)SGA
TRANSCEIVER Messages
2-119

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents