Pktprocessing-7; Pm Messages; Pm-2 - Cisco Catalyst 4500 Series Message Manual

PM Messages

PKTPROCESSING-7

Error Message C4K_PKTPROCESSING-7-ADJLOOKUPFAILED:Draining the backed up packets in
CPU queue when we cleaned up FIB adjacencies. Last drained packet's source address
[ip-addr]
PM Messages
This section contains the Port Manager (PM) messages.

PM-2

Error Message PM-2-LOW_SP_MEM: Switch process available memory is less than [dec]
bytes
Error Message PM-2-NOMEM:Not enough memory available for [char]
Error Message PM-2-VLAN_ADD:Failed to add VLAN [dec] - [char].
Catalyst 4500 Series Switch Cisco IOS System Message Guide Release 12.2(31)SGA
2-72
and destination address
This event can occur when the software processes the routed packets and the router port
Explanation
is shut down. The software can automatically repair adjacencies, but there was at least one packet
in the queue that was lost.
This is an informational message only. No action is required.
Recommended Action
The switch has insufficient memory for processing. Too many Layer 2 VLANs might
Explanation
have been configured in the system.
Remove Layer 2 VLANs or other features from the system to reduce memory
Recommended Action
usage.
The Port Manager subsystem cannot obtain sufficient memory for the specified PM
Explanation
operation. [char] is the PM operation ID.
Explanation The VLAN was not added to VTP, because of the reason stated in the text string.
This is an informational message only. No action is required.
Recommended Action
Chapter 2
[ip-addr]
Messages and Recovery Procedures
OL-11541-01