Cisco Catalyst 4500 Series Message Manual page 33

Cisco ios system message guide
Hide thumbs Also See for Catalyst 4500 Series:
Table of Contents

Advertisement

Chapter 2
Messages and Recovery Procedures
Error Message C4K_COMMONHWACLMAN-4-FAILEDTOSWITCHPORTTAGS:Failed to switch port
tags, old tag: [object-info] new tag: [object-info] . Software paths: [dec]
Hardware paths: [dec]
Explanation
trying to configure will not become active.
Recommended Action
Error Message C4K_COMMONHWACLMAN-4-FAILEDTOSWITCHVLANTAGS:Failed to switch vlan
tags, old tag: [object-info] new tag: [object-info] . Software paths: [dec]
Hardware paths: [dec]
Explanation
trying to configure will not become active.
Recommended Action
Error Message C4K_COMMONHWACLMAN-4-HWPROGSUCCESS: [char] [char] - now fully loaded
in hardware TCAM
Explanation
processed in software due to a prior loading failure will now be processed in hardware. If the feature
is a policy map, then QOS will be reenabled on the specific interface.
Recommended Action
Error Message C4K_COMMONHWACLMAN-4-OUTOFPATHS: Could not allocate path for
( [object-info] )
Explanation
Recommended Action
Error Message C4K_COMMONHWACLMAN-4-OUTOFTAGS:No more free tags available for path
( [object-info] )
Explanation
either too many features using ACLs or features using ACLs that are attached to ports or VLANs,
the hardware forwards the packets to CPU for ACL processing.
Recommended Action
Error Message C4K_COMMONHWACLMAN-4-PERMITALL: Out of resources for Qos, permit all
for
Explanation
QoS is applied.
Recommended Action
OL-11541-01
The software failed to switch tags. This error could be transient. The ACL that you were
Detaching and reattaching the ACLs (and policies) might solve the problem.
The software failed to switch tags. This error could be transient. The ACL that you were
Detaching and reattaching the ACLs (and policies) might solve the problem.
ACL-based features are now successfully loaded. Packets that were previously
This is an informational message only. No action is required.
There are too many ports or VLANs using ACLs. The ACLs might not work correctly.
Remove unnecessary ACLs from some interfaces.
All available tags are being used or are about to be used. Because you have configured
Remove unnecessary ACLs from some interfaces.
[object-info]
The switch is running out of hardware CAM resources. All packets are permitted, and
Remove unnecessary ACLs from some interfaces.
Catalyst 4500 Series Switch Cisco IOS System Message Guide Release 12.2(31)SGA
COMMONHWACLMAN Messages
2-13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents