Cisco Catalyst 4500 Series Message Manual page 73

Chapter 2 Messages and Recovery Procedures
Error Message C4K_IOSMODPORTMAN-4-NFLMISMATCH: Netflow Services Cards have
mismatched [char]. ([dec] on [char] and [dec] on [char]).
Explanation
standby supervisor engines do not match.
Recommended Action
engines.
Error Message C4K_IOSMODPORTMAN-4-PEMBAD: Power Entry Module has failed
Explanation
Recommended Action
most likely to occur in a system using a 1400 W DC power supply and an external power shelf
providing DC current to the DC power supply.
Error Message C4K_IOSMODPORTMAN-4-POWERSUPPLYBAD:Power Supply [dec] has failed or
been turned off
Explanation
between the two cases.
Recommended Action
Error Message C4K_IOSMODPORTMAN-4-POWERSUPPLYFANBAD:Fan of power supply [dec] has
failed
Explanation
Recommended Action
Error Message C4K_IOSMODPORTMAN-4-POWERSUPPLYREMOVED:Power supply [dec] has been
removed
Explanation
Recommended Action
Error Message C4K_IOSMODPORTMAN-4-POWERSUPPLYOUTPUTDECREASED: Power supply [dec]
output has decreased
Explanation
or some failure in the power supply.
Recommended Action
OL-11541-01
The IDPROM attributes of the NetFlow Services Cards installed on the active and the
Verify that the NetFlow Services Card is correctly installed on both supervisor
The external power supply source providing PoE power is bad.
Check the external power supply and replace it, if necessary. This message is
A power supply failed or was turned off. The hardware cannot make a distinction
Replace the power supply as soon as possible.
A power supply fan failed.
Replace the power supply as soon as possible.
The power supply was removed.
This is an informational message only. No action is required.
The power supply output decreased. This could be due to switching it off, power failure,
This is an informational message only. No action is required.
Catalyst 4500 Series Switch Cisco IOS System Message Guide Release 12.2(31)SGA
IOSMODPORTMAN Messages
2-53