Cisco Catalyst 4500 Series Message Manual page 56

HWACLMAN Messages
Error Message C4K_HWACLMAN-4-CLASSIFCAMREPLYPARITYERROR: Parity error detected in
lookup response from
[char]
Explanation
this message repeatedly, there is a strong likelihood of a fault in the switching engine ASICs and the
supervisor engine will need to be replaced. Software will attempt to fix the parity error by rewriting
the TCAM entries to the hardware.
Recommended Action
Error Message C4K_HWACLMAN-4-CLASSIFCAMREQPARITYERROR: Parity error detected in
lookup request to
[char]
Explanation
this error repeatedly, there is a strong likelihood of a fault in the switching engine ASICs and the
supervisor engine will need to be replaced.
Recommended Action
Error Message C4K_HWACLMAN-4-QOSFEATUREOUTOFSWRESOURCES: Out of memory.
inactive
Explanation
QoS TCAM hardware. The given QoS policy configuration will not work on the given port until this
is corrected.
Recommended Action
Some workarounds to attempt are:
–
–
If the problem persists, contact your technical support representative.
Error Message C4K_HWACLMAN-4-WARNINGSTRING:[char]
Explanation
Recommended Action
Catalyst 4500 Series Switch Cisco IOS System Message Guide Release 12.2(31)SGA
2-36
[input/output]
The system detected a transient error in the classification TCAM operation. If you see
If the problem persists, contact your technical support representative.
[input/output]
The system detected a transient error in the Classification TCAM operation. If you see
If the problem persists, contact your technical support representative.
on port [char]
The software could not allocate memory to write the QoS related configuration to the
This condition might occur under extreme ACL and/or QoS configurations.
Try reducing the unwanted QoS and ACL configurations from ports and VLANs.
Try disabling and re-enabling QoS via the qos global configuration command.
A nonspecific warning message was displayed.
See the message string [char] for more information.
Chapter 2
Classification CAM, Response Contents:
Classification CAM,
Messages and Recovery Procedures
Data [char] Address
[char] is
OL-11541-01