Sw-Vlan-6 - Cisco Catalyst 4500 Series Message Manual

Chapter 2 Messages and Recovery Procedures
Error Message SW_VLAN-4-VTP_INVALID_EVENT_DATA: VLAN manager received bad data of
type [char]: value [dec] while being called to handle a [char] event
Error Message SW_VLAN-4-VTP_USER_NOTIFICATION: VTP protocol user notification:
[char]
Error Message SW_VLAN-4-VTP_SEM_BUSY: VTP semaphore is unavailable for function
[char]. Semaphore locked by [char]

SW-VLAN-6

Error Message SW_VLAN-6-VLAN_DAT_CACHE_EXISTS: Unexpected vlan.dat cache exists.
Removing the cache and continuing the
Error Message SW_VLAN-6-OLD_CONFIG_FILE_READ: Old version [dec] VLAN configuration
file detected and read OK. Version [dec] files will be written in the future.
OL-11541-01
The VLAN Manager received invalid data from the VTP configuration software.
Explanation
Recommended Action This is an informational message only. No action is required.
The VTP protocol code encountered an unusual diagnostic condition.
Explanation
This is an informational message only. No action is required.
Recommended Action
The VTP database is currently locked by another task and is not available. Retry the
Explanation
operation later.
Recommended Action Retry the operation later.If the problem persists, contact your technical support
representative.
An existing VLAN cache file was found while synchronizing supervisor engines. This
Explanation
message is informational only, the switch will continue to work properly even after encountering
this situation.
If this message appears frequently, contact your technical support
Recommended Action
representative.
The VLAN software detected an old version of the VLAN configuration file format. The
Explanation
VLAN software was able to interpret the file with no problems, but it will create files using the new
format in the future.
Recommended Action This is an informational message only. No action is required.
Catalyst 4500 Series Switch Cisco IOS System Message Guide Release 12.2(31)SGA
sync with new set.
SW-VLAN Messages
2-109