Assigning A New Ip Address To A Camera; Figure 6 Device List; Figure 7 Ip Assignment - Honeywell 30 Series Manual

After the scanning, all scanned devices in the same subnet and different subnet will be
displayed in the devices list.

Figure 6 Device List

Assigning a New IP Address to a Camera

The current IP address of a camera appears in the IP ADDRESS column of the devices
list. You can assign a new static IP address to the camera.
Select the target device(s) as shown in
displayed:

Figure 7 IP Assignment

Configure IP Address Setting
•
To obtain IP address, subnet mask, and default gateway settings automatically,
check DHCP.
Honeywell 30 Series IP Cameras User Guide
Figure 6, click and the following figure is
7