Table of Contents
Advertisement
Installation Equipment
1.2.1 Included Materials
The following materials are required and are shipped with the ONS 15454. The number in parentheses
gives the quantity of the item included in the package.
•
•
•
•
•
•
•
•
•
•
1.2.2 User-Supplied Materials
The following materials and tools are required but are not supplied with the ONS 15454.
•
•
•
•
•
•
•
•
•
•
•
•
1.2.2.1 Tools Needed
•
•
•
•
•
Cisco ONS 15454 Installation and Operations Guide
1-4
#12-24 x 3/4 pan head phillips mounting screws (8)
#12 -24 x 3/4 socket set screws (2)
T-handle #12-24 hex tool for set screws (1)
ESD wrist strap with 1.8 m (6 ft) coil cable (1)
Tie wraps (10)
Pinned Allen key for front door (1)
Spacers (4)
Spacer mounting brackets (2)
Clear plastic rear cover (1)
Bottom brackets for the fan-tray air filter
Equipment rack (22 inches total width for a 19-inch rack; 26 inches total width for a 23-inch rack)
Fuse panel
Power cable (from fuse and alarm panel to assembly), #10 AWG, copper conductors, 194°F [90°C])
Ground cable #6 AWG stranded
Alarm cable pairs for all alarm connections, #22 or #24 AWG, solid tinned
Shielded Building Integrated Timing Supply (BITS) clock cable pair #22 or #24, solid tinned
Single mode SC fiber jumpers with UPC polish (55 dB or better) for optical cards
Shielded coaxial cable terminated with SMB or BNC connectors for DS-3 cards
Shielded ABAM cable terminated with AMP Champ connectors or unterminated for DS-1 cards
with #22 or #24 AWG ground wire (typically about two feet in length)
Tie wraps and/or lacing cord
Labels
Listed pressure terminal connectors such as ring and fork types; connectors must be suitable for
10AWG copper conductors
#2 phillips screw driver
Medium slot head screw driver
Small slot head screw driver
Wire wrapper
Wire cutters
Chapter 1
Hardware Installation
November 2001
Advertisement
Table of Contents
