Figure 5-23 Layout Of Node Id 0 In The Oc-3 Upsr Example (Figure 5-15); Figure 5-24 Layout Of Node Ids 1 - 3 In The Oc-3 Upsr Example (Figure 5-15) - Cisco 15454-TCC - Network Processor Card Operation Manual

Chapter 5 SONET Topologies
Unidirectional Path Switched Rings

Figure 5-23 Layout of Node ID 0 in the OC-3 UPSR example (Figure 5-15)

In the Figure 5-22 on page 5-28 example, Nodes IDs 1 - 3 each contain two DS1-14 cards and two OC3
4 IR 1310 cards. Eight free slots exist. They can be provisioned with other cards or left empty.
Figure 5-24 shows the shelf assembly setup for this configuration sample.
Figure 5-24 Layout of Node IDs 1 – 3 in the OC-3 UPSR example (Figure 5-15)
Cisco ONS 15454 Installation and Operations Guide
5-29
November 2001