Procedure: Select Fifteen-Minute Pm Intervals On The Performance Monitoring Screen; Figure 8-2 Time Interval Buttons On The Card View Performance Tab - Cisco 15454-TCC - Network Processor Card Operation Manual

Chapter 8 Performance Monitoring
Figure 8-2
Fifteen-minute and twenty-four hour intervals

Procedure: Select Fifteen-Minute PM Intervals on the Performance Monitoring Screen

Open the electrical or optical card of choice. Double-click the card's graphic in the main (node) view or
Step 1
right-click the card and select Open Card. (Clicking a card once highlights the card only.)
From the card view, click the Performance tab.
Step 2
Click the 15 min button.
Step 3
Click the Refresh button. Performance monitoring parameters display in 15-minute intervals
Step 4
synchronized with the time of day.
View the Current column to find PM counts for the current 15-minute interval.
Step 5
Each monitored performance parameter has corresponding threshold values for the current time period.
If the value of the counter exceeds the threshold value for a particular 15-minute interval, a threshold
crossing alert (TCA) will be raised. The value represents the counter for each specific performance
monitoring parameter.
Step 6 View the Prev-N columns to find PM counts for the preceding 15-minute intervals.
November 2001
Time interval buttons on the card view Performance tab
Using the Performance Monitoring Screen
Cisco ONS 15454 Installation and Operations Guide
8-3