Cisco 15454-TCC - Network Processor Card Operation Manual page 242

Creating a Path Trace
Figure 6-7
On the Circuit Path Trace window
Step 5
only on DS-1, DS3E, and DS3XM cards), enter the string that you want the source port to transmit. For
example, you could enter the node IP address, node name, circuit name, or another string. If the New
Transmit String field is left blank, the J1 transmits an empty string.
Figure 6-8
Click Apply but do not close the window.
Step 6
Return to the Edit Circuit window
Step 7
Cisco ONS 15454 Installation and Operations Guide
6-14
Selecting the Edit Path Trace option
(Figure
Setting up a path trace
(Figure
6-8) in the New Transmit String field (this field is available
6-7).
Chapter 6 Circuits and Tunnels
November 2001