Card Parameters; Procedure: Modify Line And Threshold Settings For The Ds-3 Card - Cisco 15454-TCC - Network Processor Card Operation Manual

Provisioning Electrical Cards
Table 7-2
Subtab
Alarming
Step 5 Click Apply.
Repeat Steps 4 – 5 for each subtab that has parameters you want to provision.
Step 6
7.2.2 DS-3 Card Parameters
The ONS 15454 DS-3 cards (DS3-12 and DS3N-12) provide 12 DS-1 ports. Each port operates at 44.736
Mbps. Default thresholds are based on recommendations in GR-820-CORE, Section 5.0.

Procedure: Modify Line and Threshold Settings for the DS-3 Card

Step 1 Display the DS3-12 or DS3N-12 in CTC card view.
Step 2 Click the Provisioning tab.
Step 3 Depending on the setting you need to modify, click the Line, Line Thrshld, or Sonet Thrshld subtab.
Note
Step 4 Modify the settings shown in
double-click the field and type the new number.
Cisco ONS 15454 Installation and Operations Guide
7-6
DS-1 Card Parameters (continued)
Parameter Description
Port Port number
Profile Sets the alarm profile for the port
Suppress Suppresses alarm display for the
Alarms port
See Chapter 10, "Alarm Monitoring and Management"
Behavior tab.
Table
Options
1 - 14
7-3. For drop-down lists, select an item from the list. For numerics,
Chapter 7 Card Provisioning
Default
•
Inherited
•
Custom profiles (if any)
•
Unselected (default)
•
• Selected
for information about the Alarm
November 2001